Charging station data sheet: Deletion of charging profiles

From now on it is possible to delete charging profiles in be.ENERGISED via the charging station data sheet.

What are charging profiles?

Charging profiles (power over time) can be used via OCPP (Open Charge Point Protocol). Charging profiles can be defined using an energy management system, for example.
A charging station can receive and store a charging profile. The charging profile defines how fast a vehicle is charged over time and how much power is consumed.

In the future, this will be relevant in the context of load management. Charging profiles can also be stored locally at the charging station in some cases.

Why is it necessary to delete charging profiles?

Charging profiles always represent a limitation of the output power of the charging station. Depending on the setup, for example, if the charging station is removed from the load management cluster in the future, it may be necessary to remove the stored charging profile so that the charging station can deliver power again without limitation.

How can the charging profile at the charging station be deleted in be.ENERGISED?

In be.ENERGISED, first go to the charging station data sheet of the affected station under Infrastructure/Charging stations/Station list. In the next step, go to "Clear charging profiles" under "Station management".

You will then be asked again whether you really want to delete the charging profiles at the charging station. Confirm this with "Clear charging profiles".

You will find a corresponding entry in the communication logs of the charging station.

More information on the charging station data sheet can be found here.