If you want to use the be.ENERGISED COMMUNITY with your own operator ID, you must register the operator ID accordingly. The operator ID is also part of the EVSE IDs, which are attached to the individual connectors of your charging stations in the form of QR codes. You can find more details about the configuration of the EVSE ID here.
If you want to use your own operator ID, please follow the steps below.
Applying for the EVSE ID and QR codes
Please note that each country has different requirements for the assignment of operator IDs. In Germany the allocation is done by the Bundesverband der Energie und Wasserwirtschaft, in Austria the Austrian Mobile Power, in other countries other institutions may act as issuing authority.
Please inform yourself in advance about the country-specific principles.
Please ensure that QR codes have been generated with the appropriate routing and prepared for printing/sticking. These must be applied to the stations before final activation of the COMMUNITY.
QR codes can be ordered either through has·to·be, or a separate supplier.
Activation & Integration
Once you have obtained your operator ID, please submit a request via the request form in the
Support Center of has·to·be, with the request to
a) Activation of the new operator ID with has·to·be's roaming partners.
Please specify the identifier of your EVSE-IDs (e.g.: DE*LDL).
b) Integration of the new Operator-ID in be.ENERGISED
Please provide the following data for this purpose:
- Company name
- Postal Code
- Hotline number (CPO)
- VAT ID No.
- Shall be.ENERGISED COMMUNITY be used? yes/no
Activation of be.ENERGISED COMMUNITY at your charging stations
Please follow the step-by-step instructions in the article "Deployment of charging stations for the be.ENERGISED Community".
Version: 2022-05-27 07:12:51 UTC