This article describes the basic configurations and requirements of the be.ENERGISED instance to make charging stations accessible for Intercharge (Hubject). be.ENERGISED enables the connection of charging stations for electric vehicles to the roaming platform of Hubject and thus enables third parties a non-discriminatory access to your charging stations. The following article describes the necessary configuration steps to configure your charging stations for the usage with Intercharge.
|To gain access to the Intercharge Network, you have to have a valid access contract (subject to a charge) with Hubject. In addition, you must first request the activation of the Intercharge interface in be.ENERGISED via customer support and then continue with the following steps please.|
After the Intercharge interface has been set up by has·to·be for your be.ENERGISED instance, you can continue with the configuration. Please note that several pre-settings are necessary in order to make your charging stations accessible for using the interface.
Due to the standardization of the charging station data to be transmitted, it is necessary that all charging stations in your instance are configured completely and correctly. Charging stations that do not have all the necessary configuration features are ignored when the synchronizing the charging station data with the Intercharge network and are therefore not available.
Please pay attention to finish the configuration (points 1 to 5) of the charging stations completely to make them available in the Intercharge network:
- charging connectors and EVSE IDs
- basic data including location and geo coordinates of the charging station
- marketing data (at least in German language!) and the driver’s hotline
- roaming characteristics of the charging station
- activate the charging station for use with the Intercharge Network.
The following paragraphs describe the basic configuration for the above functions in detail.
Charge point configuration
To use roaming capabilities in be.ENERGISED it is necessary to set the configuration of the charging statiaons in a way that only useable charge points for each vehicle are displayed. You must therefore assign the correct plug type, output power and the explicit EVSE ID to each charge point.
To configure the charging connections, navigate to Infrastructure/Charging stations/Station list and open the station data sheet of the charging station there. Now navigate to the tab named Charge points. In this tab, all charging connections identified for the charging station are listed.
Fig. 1: Checking the charging points for complete and correct configuration of charging points and CPO tariffs
Please check here whether the following properties (points 1 to 4) have been configured correctly for all connectors (charge points) of the station.
Fig. 2: Manage charge points
- The designation entered is understandable for the EV-driver
- The connection type of the charge point is correctly defined
- An EVSE ID is assigned to the charge point
- A roaming charge point rate has been assigned
If data in this configuration does not meet your expectations, is incorrect or missing, you can open the configuration menu for the respective charging point by clicking on the pencil icon.
Fig. 3: Performing the configuration of a charge points on a charging station
In the configuration menu, the charge point is named accordingly and the maximum output power of your connection (e.g. Type 2 AC 11 kW) is selected; these information are then displayed on MobileApps and map services.
|In addition, you must assign the individual EVSE ID for each charge point. You find the ID on the QR Code sticker of each charge point!|
Please note that you can only use EVSE-IDs which are within your range. If you have any questions, please contact our support-team.
Finally, a charge point rate (roaming) has to be assigned to this charge point. Charge point rates are charged to the respective roaming provider or the EV-driver for direct payment via the be.ENERGISED Community rates.
The COMMUNITY rates enable you to activate your stations for incoming roaming without additional contractual relationships via Hubject. In this case, all charging processes at your charging stations will be billed by has·to·be and you will receive a monthly credit for the tariffs you have selected.
Configuration of basic data
In order to publish the data of the charging station via interfaces, it is necessary to set the location data of the charging station in the system. This information is then automatically transmitted to roaming interfaces and is then available to external charging customers. You can configure the basic data using the station data sheet in the Edit/Basic Information menu.
Edit basic information of a charging station
Fig. 4: Updating the common information of a charging station with location, coordinates and RFID access information
Please also select a name for this charging station - this will be visible to EV-driver and should include an understandable and descriptive name, and the address of the charging station. Longitude and latitude are specified in another menu item.
In order to react quickly to detected errors, that cannot be solved by remote access, we ask you to enter the contact details of a technician in the be.ENERGISED backend. You can do this in the charging station data sheet for each charging station.
Configuration of the marketing information
In the Marketing tab, you must fill in the mandatory information that Intercharge requires. The marketing information can be entered in different languages - however, this must be entered at least in one language. Without this information charging stations will not be activated for roaming!
Configuration of the marketing information of a charging station
Fig. 5: Configuration of the customer hotline, contact persons and definition of the display status in portals
Please enter here the contact person of the station on site - this will be displayed as the contact person in navigation systems. It is also necessary to enter the hotline number where EV-drivers can require assistance in operating and using the charging station. Please enter the phone number in the format +49 555 1234567 and do not use any other separators, special characters, etc.
The technician receives e-mails in case of any error on the charging station. For this purpose, an e-mail address must be entered at the backend user. It is recommended to set up an e-mail address to which several persons have access.
Fig. 6: Configuration of the description of the charging station, the necessary additional information as well as information on the availability and accessibility of the charging station
Finally, configure the accessibility of the charging station and enter an explanatory text describing the charging station. This information can also be viewed by public and is transmitted to navigation systems. Please also enter any accessibility restrictions, such as opening hours, here.
Configuration of Roaming Properties
To finally enable the charging station to use the roaming network, you must enter the necessary configurations on the charging station. These are settings of standardized access parameters and properties to ensure compatibility with all common roaming systems.
Navigate to Roaming/Common Settings and configure the parameters your Base Station has.
Please note that these configurations are necessary and Intercharge requires at least one configuration in each section. If this data is incorrect or incomplete, the charging station will not be transmitted to the Intercharge network.
Configuration of the basic data of the roaming interfaces
Fig. 7: Setting the general parameters for the use of roaming interfaces in connection with be.ENERGISED
Please go through the displayed list one by one and activate every option that applies to the respective charging station by clicking on it.
Activation of the charging station
After you have completed the charging station configurations described above, you can now unlock the charging station for use with the roaming interface. You have the option of individually enabling roaming interfaces for each charging station.
|Please note, however, that each charging station must be activated individually to make it accessible for roaming.|
Activation of Roaming Interfaces
Fig. 8: Actuating a roaming interface for an individual charging station
The station is unlocked by clicking on the switches in the respective network. As soon as it changes to green, the data from the charging station is prepared for distribution to the roaming network. This data is then transmitted to the Intercharge network in a daily automated comparison.
|If a setting, as mentioned above, is not complete, an error message appears in red.|
Version: 2021-02-16 12:01:10 UTC